In a recent meeting at Brinc’s Hong Kong headquarters, the Barcelona based team behind Kibus petcare was quick to point out that most millennial consider pets to be a member of their family. This kind of statement manifests itself in many ways. But for many, it simply means home-cooked meals for their cats and dogs.
For a rabbit owner, it means rinsing off some arugula in the sink once a day. But for other pet owners, the prospect is a fair bit more complex as they may have to put in more effort into preparing meals for their four-legged friend.
The pitch behind Kibus is an attempt to split the difference. The company’s appliance is developed and designed to provide something like a home-cooked meal for your pets, with less minimum effort.
“The system is known to accept plastic cartons filled with freeze-dried pet food.”
All you need to do is pour in water and the system will heat it up, cooking the items in the process.
The company will launch a Kickstarter campaign in order to promote and sell the product. The product currently is in the prototype form. It will be available at $199. The initial version of the product will include user-friendly pods. However, in the future the company may have plans to limit these to the pre-made variety, clearly going after a kind of ink cartridge to monetizing the system.
The pods will work out to around 1 Euro a day with the machine rationing out foods for your cats and dogs, one to five times a day. Each is expected to last for a week or somewhere in the neighborhood of three days for the largest dog. To start, the company is currently providing five different food options. This includes two options for cats and three options for dogs. However, more options are going to be added soon.
Users can keep a check on the system from a distance and program in the sound of their own voice to call the pet over when it’s feeding time.
Move Over SpaceX. Amazon is planning to launch Thousands of Internet Satellites Too
In April 2019, Amazon made its intention clear that it is going to enter the internet satellite business. Following the footsteps of Starlink and SpaceX satellite system, Amazon plans to launch thousands of internet satellites in the coming future. They have already filed their application with the FCC.
Amazon is calling its system Project Kuiper, and they are all set to do business. Based on the application to the Federal Communications Commission, they want to put 3,236 broadband satellites into orbit. This pales in comparison to SpaceX’s Starlink system, which aims to put almost 12,000 satellites into orbit in the next coming years. This is one of the biggest ventures.
In their FCC filing for Project Kuiper, Amazon states:
“There are almost 4 billion people in the world who don’t have access to reliable broadband internet. They mean to help fill that gap in global service with their ambitious project.”
Right now there are already 5000 satellites in orbit around the earth. These constellations of satellites from Amazon and SpaceX will increase that number upwards to 20000 including all the other satellites being launched monthly by the governments and companies all around the world.
These satellites will be in Low Earth Orbit which is prime real estate in space. LEO extends up to 2000 km, although strictly speaking, altitudes is not the best way to delineate LEO. The bulk of humanity’s satellites are in LEO, including the Hubble Space Telescope and the International Space Station.
Satellites from Project Kuiper are going to be grouped into 98 different orbital planes. Not just that, but they will also be grouped into two orbital shells: 590 km and 630 km.
There is more than physical space to be managed and allotted to Amazon, SpaceX, and other satellite internet providers. They are required to share broadcast spectrum space too.
Project Kuiper’s satellites are known to operate in the Ka-Band radio frequencies. This is the same one as used by satellite phone company Iridium, among others. There are procedures established by companies to share frequencies without interfering with each other.
V3 Supercharger From Tesla Can Charge Up To 1500 Electric Vehicles In A Single Day
Tesla has recently opened a large next-generation electric vehicle charging station in Las Vegas. It is known to combine the company’s core products into one single sustainable energy ecosystem. This is done to fulfill a vision of Elon Musk, CEO.
The new V3 supercharger is known to support a peak rate of up to 250 kilowatts. It has been designed to reduce the charging time for its electric vehicles. The V3 supercharger was unveiled by Tesla in March at its Fremont, Calif factory. A second V3 supercharger is located in Hawthorne, Calif close to the Tesla Design Studio. Both the sites were initially used as test sites, lack two important Tesla products.
The one located in Las Vegas is considered to be the first V3 supercharger. It is notable not only because of its size but there are 39 chargers at the station. This V3 supercharger also uses Tesla solar panels along with its Powerpack batteries in order to generate and store the power required to operate the chargers. As a result, the entire system generates its own energy and passes it along to thousands of Tesla vehicles.
The new supercharger located off the Las Vegas strip, below the High Roller on the LINQ promenade was constructed on Caesars Entertainment Property. The site is actually a part of Caesars Entertainment’s goal to cut down on greenhouse gas emissions 30% by 2025.
There are caveats to the capabilities of this supercharger station. Only one Tesla vehicle, model 3 long range iteration can charge at the maximum rate of 250 kW. The 250 kW results in up to 180 miles of range added to the battery in 15 minutes.
New models, Model S and Model X are designed to charge up to 200 kW rate.
Improvements to charging times are critical for the company. wait times at supercharger stations can be lengthy.
In the past, the company has said:
“These improvements will allow the supercharger network to serve more than twice as many vehicles per day at the end of 2019 compared with today.”
Georgia Tech Announces Vibration Powered Ant-sized Micro Robots
A 3D-printed robot of roughly 2 mm in length almost of the size of the smallest ant is the latest entrant in the world of micro-bots. Interestingly, these bots move in response to vibration from the piezoelectric actuators, ultrasound source or even a small speaker.
According to a research paper released by the School of Electrical and Computer Engineering at the Georgia Institute of Technology, these ant-sized robots is likely to revolutionize the tech space as these could be used to:
“sense environmental changes, move materials and even repair injuries inside the human body one day”
Depending on the configuration, these “micro-bristle-bots” responds differently to different vibration frequencies. This variable frequency response mechanism allows researchers to control individual ant-sized bots. The mobility response is quite amazing. According to paper, these bots can cover four times their own length in a second.
Azadeh Ansari, an assistant professor at the institute says:
“We are working to make the technology robust, and we have a lot of potential applications in mind.”
Adding further she said that the team is working at the intersection of mechanics, electronics, biology, and physics. It’s a very rich area and there’s a lot of room for multidisciplinary concepts, she added.
As there is no battery of that minuscule size to fit within bots, this vibration response mechanism and control system could change the dynamism of the micro-bot research. Although there are immense future possibilities, as of now the team is just dealing with some tiny prototypes.
The paper says that the bot consists of a piezoelectric actuator glued onto a polymer body that is 3D-printed using two-photon polymerization lithography (TPP). Actuator induced vibration to move the springy legs up and down, propelling the micro-bot forward.
“As the micro-bristle-bots move up and down, the vertical motion is translated into a directional movement by optimizing the design of the legs, which look like bristles.”
She added that the legs of the micro-robot are designed with specific angles allowing them to bend and move in one direction in resonant response to the vibration.
How to Find the Best Digital Piano – Best Digital Pianos & Electronic Keyboard in 2019
There are many digital pianos available in the market. All the models differ from each other in a certain manner....
Best Z270 Motherboards 2019 – Reviews
Are you into gaming? You might then know how important it is to have a good motherboard for gaming computers....
Move Over SpaceX. Amazon is planning to launch Thousands of Internet Satellites Too
In April 2019, Amazon made its intention clear that it is going to enter the internet satellite business. Following the...
Malware hidden in WhatsApp affects 25 million android phones
According to cyber securities, around 25 million Android phones have been affected by a serious malware hidden in WhatsApp. The...
Fortnite leakers band together to sweat off spoiling the big event this weekend
In these days of rampant data mining, there are some things that still surprises us. Even Fornite’s seemingly endless parade...
VMware acquires ML acceleration start-up Bitfusion
Today, VMware announced that it has acquired Bitfusion which is a former participant in the Start-up Battlefield Competition. Bitfusion was...
Adam Neumann, CEO Of WeWork Has Reportedly Cashed Out Of Over $700 Million Ahead Of Its IPO
Adam Neumann, the chief executive, and co-founder of the international real estate co-working start-up WeWork has cashed out over $700...
Mobile2 months ago
Apple is going to shift to its new keyboard design in 2019/2020 MacBooks
Reviews4 months ago
Best X99 Motherboards for Gaming 2019
Mobile2 months ago
WhatsApp is testing for a new feature that shares your status with other apps
Internet2 months ago
Google maps will now be able to predict how crowded your train or bus will be
Technology2 months ago
Africa and Europe to be linked by Google’s next undersea internet cable
Mobile1 month ago
Neuralink’s plans for brain-reading ‘threads’ with a robot to insert them is revealed by Elon Musk
Technology1 month ago
Hellobike, the survivor of China’s bike-sharing craze, goes electric
Internet1 month ago
Archinaut snags $73 million in NASA funding to 3D-print giant spacecraft parts in orbit